Share:
The Autopulse 320 T3 is the digital MIG / MAG double pulsed generator with 3 integrated wire feeder for car body. It is an extremely advanced machine with 68 synergic curves providing and exceptional arc quality. Versatile, it will hold 3 different torches to weld steel, aluminium and brazing (CuSI3 / CuAl8). The user friendly interface and the very precise wire feed make the quality of the weld on very thin sheets outstanding.
MIG/MAG Optimised Settings
MIG/MAG Optimised Settings
- Welding processes: Standard / Pulse / Cold Pulse / Manual
- Trigger activation modes: 2T, 4T, Spot, Delay and Tack Function
- Precise control over the welding cycle: CreepSpeed, Softstart, Hotstart, Upslope, Downslope, Crater Filler, Postgaz etc
- Steel wire 0.6 / 1.0mm
- Stainless Steel wire: 0.8 / 1.0mm
- Aluminium wire: 0.8 / 1.0 / 1.2mm
- Brazing wire: 0.8 / 1.0mm
- The 68 synergic curves guarantee and outstanding weld using a large range of materials, wire sizes and gases
- The integral synergic mode determines automatically the best welding settings but also allow the user to adjust them
- 4 microprocessors increase the calculation speed and general machine efficiency
- Very high arc voltage guarantee and easy arcing and an exceptional arc performance on all types of metals
- 3 electronically regulated wire feeder fitted with 2 drive rolls
- Suitable for wire reels of 200mm diameter
- Compatible with Push Pull torches (24V)
- New and simplified interface designed specifically for use by bodyshop staff
- Colour screen XL to set and control the welding cycle very precisely
- 2 scroll wheels and 4 buttons to easily navigate through the different menus
- Complete update of the machine and its program through a simple USB stick
- Storage available for up to 500 welding programs for repetitive job
GYS - AUTOPULSE 320-T3 (english version)
Inquiry - GYS Autopulse 320 T3 - MAG Welder
