The Autopulse 320 T3 is the digital MIG / MAG double pulsed generator with 3 integrated wire feeder for car body. It is an extremely advanced machine with 68 synergic curves providing and exceptional arc quality. Versatile, it will hold 3 different torches to weld steel, aluminium and brazing (CuSI3 / CuAl8). The user friendly interface and the very precise wire feed make the quality of the weld on very thin sheets outstanding.

MIG/MAG OPTIMISED SETTINGS

  • Welding processes: Standard / Pulse / Cold Pulse / Manual
  • Trigger activation modes: 2T, 4T, Spot, Delay and Tack Function
  • Precise control over the welding cycle: CreepSpeed, Softstart, Hotstart, Upslope, Downslope, Crater Filler, Postgaz etc
  • Steel wire 0.6 / 1.0mm
  • Stainless Steel wire: 0.8 / 1.0mm
  • Aluminium wire: 0.8 / 1.0 / 1.2mm
  • Brazing wire: 0.8 / 1.0mm

SIMPLIFIED WELDING

  • The 68 synergic curves guarantee and outstanding weld using a large range of materials, wire sizes and gases
  • The integral synergic mode determines automatically the best welding settings but also allow the user to adjust them

MAXIMUM PRODUCTIVITY

  • 4 microprocessors increase the calculation speed and general machine efficiency
  • Very high arc voltage guarantee and easy arcing and an exceptional arc performance on all types of metals
  • 3 electronically regulatated wire feeder fitted with 2 drive rolls
  • Suitable for wire reels of 200mm diameter
  • Compatible with Push Pull torches (24V)

USER FRIENDLY INTERFACE

  • New and simplified interface designed specifically for use by bodyshop staff
  • Colour screen XL to set and control the welding cycle very precisely
  • 2 scroll wheels and 4 buttons to easily navigate through the different menus
  • Complete update of the machine and its program through a simple USB stick
  • Storage available for up to 500 welding programs for repetitive jobs