Advanced Centralized Paint Mixing Room

Advanced Centralized Paint Mixing Room is built to perfection for spray painters to accomplised paint mixing in the best environment. It’s brightly lit room with centralized air circulation extraction will ensure dangerous fume and bad odour to be extracted out of the room to keep a constant healthy environment inside the paint room. Comes with perfect facilities such as the stainless steel mixing table, test piece sprayer and washing sink will ensure a one stop work destination for all painters

Advanced Centralized Paint Mixing Room
Brand: Green Booth
Model: MR100

‘- Enclosed sandwich panel design paint mixing room

  • Dimension 4000m (W) x 5500mm (L)
  • Front 2 swing door with semi transparent glass 1950mm
  • Single rear full frame door for exit
  • Centralized air extraction system paint mixing table with exhaust duct
  • Air volume (min): 2900cfm
  • Exhaust Duct GI Spiral duct (approx +-100mm): 300mm, 150mm

Stainless Steel Paint Mixing Table

  • Dimension: 1800mm (L) x 950mm (W) x 890mm (H)
  • Comes with storage cabinet
  • SUS plate 1.0mm (T)
    Stainless Steel Sink For Washing Solvent and Water
  • Size (Approx +- 100mm) 2000mm (W) x 1000mm (D) x 800mm (H)
  • 2 separate compartment for water washing and solvent washing
  • 2 water tap and basin, 2 water drainage
  • SUS plate 1.0mm (T)
  • GI piping & ball valve

‘Automatic Spray Gun Washer

  • Combo set double washing tub
  • Drester pumps for automatic wash and clean rinse
  • The powerful teflon diaphragm pumps feed the nozzle with solvent
  • The pump is only working as long as operator is pressing the pedal
  • Hands free, foot operated pumps
  • Timer, reliable timer controls the time of automatic wash cycle
  • Brush, all units are fitted with a brush for cleaning
  • Clean, rinse, dry, recirculating aquasolve cleans water gun extremely efficient with double filter system

‘- 2 automatic washing stations using recirculating solvent with automatic clean rinse

  • 2 sink for manual cleaning, equipped with a flow through brush using recirculating
    solvent and spray handle using clean solvent
  • Compressed air needed – 7-12bar, 150l/min
  • Ventilation capacity required: 500cfm
  • Weight: 105kg
  • Overall dimension: 1510mm (H) x 1185mm (W) x 650mm (D)

Mini Test Piece Sprayer

  • Size (Approx +- 100mm) 1000mm (D) x 1000mm (W) x 2200mm (H)
  • EG plate 1.2mm (T)
  • Wire mesh netting
  • Paint Arrestor filter
  • LED lighting
  • Epoxy powder coating
  • Connection to centralized extraction system

Spread the word. Share this post!

Leave Comment

Your email address will not be published. Required fields are marked *